Color Temperature Converter — Kelvin, Mired & Gel Correction
Convert either Kelvin or mired inputs, calculate the source-to-target mired shift, and compare approximate CTO or CTB lighting-gel corrections.
Source and target
Enter 100–1,000,000 K, or 1–10,000 mired. These are accepted numerical input ranges, not a guarantee that the listed gel references apply across the entire range.
The target is the color temperature wanted after correction.
Quick presets
🔒Editorial verification required: the “No input tracking” claim and statements about local calculations, copying, and downloads need review against the maintained runtime and page integrations, which are not supplied here. The runtime profile identifier does not establish network or analytics behavior. Limit final privacy wording to confirmed behavior; route any required implementation changes to separate engineering work.
The reference stack projects approximately 3189 K, leaving a −1.07 mired residual to the target. Verify the real source and gel before a critical match.
Reference gel comparison
Matches are ranked by residual mired shift. Published shifts are product references, not universal values for every gel brand or light spectrum.
Option
Reference shift
Projected result
Residual to target
½ CTO + ⅛ CTO
+135 mired
3189 K
−1.07 mired
½ CTO
+109 mired
3477 K
+24.93 mired
How to use this color temperature converter
Enter the source. Use a fixture rating or, preferably, a measured correlated color temperature. Select Kelvin or mired beside the value.
Enter the target. This may be a camera balance, another fixture, or the intended corrected light temperature.
Read the signed shift. A positive result means warming correction toward lower Kelvin; a negative result means cooling correction toward higher Kelvin.
Compare the gel options. The first row checks one- and two-gel combinations. The second row always shows the nearest single reference gel.
Test the physical result. Product batches, age, heat, fixture spectrum, dimming, and stacked gels can move the real result away from the arithmetic.
Kelvin, mired, and correction formulas
Kelvin is not a linear correction scale. A 500 K change near tungsten is much larger in reciprocal-temperature terms than a 500 K change in high daylight. Mired—short for micro reciprocal degree—makes these lighting corrections easier to compare.
Adding a positive mired shift increases the reciprocal value and therefore lowers Kelvin, producing a warmer result. Adding a negative shift lowers the reciprocal value and raises Kelvin, producing a cooler result. Projected mired = source mired + reference shift. Projected Kelvin = 1,000,000 ÷ projected mired. The projected mired value must be positive for a valid temperature projection. Residual = target mired − projected mired. A negative residual means the projection is warmer than the target; a positive residual means it is cooler. If source and target are both 3200 K, each is 312.5 mired, so the required shift is 0 mired. Equal CCT still does not guarantee matching spectra or green-magenta tint.
Positive shift: CTO
Use an orange or warming correction when the target Kelvin is lower than the source. Example: 6500 K to 3200 K is approximately +158.65 mired.
Negative shift: CTB
Use a blue or cooling correction when the target Kelvin is higher than the source. Example: 3200 K to 5700 K is approximately −137.06 mired.
CTO and CTB reference shifts
The calculator uses the following published LEE Filters values to make its reference comparisons. Fractional names do not represent an exact linear fraction of the full filter's mired shift, so the listed values—not the fraction labels—drive the matching calculation. Published gel shifts and shifts calculated from the listed example temperatures need not coincide exactly. The half-CTB row lists −78 mired, while 3200 K to 4300 K gives 1,000,000 ÷ 4300 − 1,000,000 ÷ 3200 ≈ −79.94 mired. Both values are retained pending verification against the existing LEE 202 reference; the example temperatures should not be read as exact equivalents of the published shift.
Correction
Reference product
Published mired shift
Published example
Full CTO
LEE 204 (source-d1a80deb7df768d3cd52954cd3b76995)
+159
6500 K to 3200 K
½ CTO
LEE 205 (source-05fae157d0bfcbdbc07cf855380ff2a2)
+109
6500 K to 3800 K
¼ CTO
LEE 206 (source-15ae868135de1db86f23fcb5834c7bec)
+64
6500 K to 4600 K
⅛ CTO
LEE 223 (source-0d94a96fbb2bed2042843bd143f118ce)
+26
6500 K to 5550 K
Full CTB
LEE 201 (source-58cef6890f40f10255bb0832dc1b1031)
−137
3200 K to 5700 K
½ CTB
LEE 202 (source-a71ad0d633aaa0ce40d9be3db92d70b7)
−78
3200 K to 4300 K
¼ CTB
LEE 203 (source-43cdd9315335f5915a9ca3bd2a0f7025)
−35
3200 K to 3600 K
⅛ CTB
LEE 218 (source-e8d33a806d2aa2fc2333888fe880cb60)
−18
3200 K to 3400 K
Technical references: LEE Filters product data for Full CTO, Half CTO, Quarter CTO, Eighth CTO, Full CTB, Half CTB, Quarter CTB, and Eighth CTB. Kodak's Wratten filter tables independently publish conversion temperatures and signed mired shifts and caution that filtration values are approximate. Editorial follow-up: conduct a separate verification pass over the supplied references to confirm product values, descriptive source titles, publisher metadata, and the relevant page in the Kodak PDF (source-0f93cb3ee3b19eae03d887db054aed40). Preserve existing source IDs and URLs. Record access or editorial review dates only when that review actually occurs.
Worked color-temperature examples
Source → target
Source mired
Target mired
Required shift
Direction
6500 K → 3200 K
153.85
312.5
+158.65
Warm / CTO
5600 K → 3200 K
178.57
312.5
+133.93
Warm / CTO. For the default example, 5600 K is approximately 178.57 mired. The listed ½ CTO + ⅛ CTO stack adds +135 mired: projected mired = 1,000,000 ÷ 5600 + 135 ≈ 313.57; projected Kelvin = 1,000,000 ÷ (1,000,000 ÷ 5600 + 135) ≈ 3189 K. The 3200 K target is 312.5 mired, so residual = 312.5 − (1,000,000 ÷ 5600 + 135) ≈ −1.07 mired. Displayed results are rounded after calculation. The closest numerical match does not guarantee a physical lighting match.
3200 K → 4300 K
312.5
232.56
−79.94
Cool / CTB
3200 K → 5700 K
312.5
175.44
−137.06
Cool / CTB
Assumptions and practical limits
This calculator treats the entered values as ideal correlated color temperatures and models gel shifts by addition on the mired scale. A real source is a spectrum, not just a Kelvin number. Two fixtures can share a CCT while differing in spectral power distribution, green-magenta tint, color rendering, output, and camera response. Gel also absorbs light; this tool does not calculate exposure loss.
Stacked-gel shifts are added as a planning approximation. Transmission curves interact, and heat, fading, angle, fixture optics, dimming, and product variation can change the result. For matching cameras, LEDs, discharge sources, or critical color work, check the manufacturer's current data and measure the corrected light with a suitable color meter or spectrometer.
Color temperature converter FAQ
What is a mired?
A mired is one million divided by color temperature in kelvins. Because it is reciprocal, the scale better reflects the size of color-temperature corrections across warm and cool sources.
How do I convert Kelvin to mired?
Divide 1,000,000 by the Kelvin value. The same formula in reverse converts mired to Kelvin: 1,000,000 divided by mired.
What do positive and negative mired shifts mean?
A positive shift moves toward a lower, warmer color temperature and normally calls for CTO-type correction. A negative shift moves toward a higher, cooler color temperature and normally calls for CTB-type correction.
What gel corrects 5600 K to 3200 K?
The exact arithmetic is approximately +133.93 mired. That does not map universally to one gel name because manufacturers publish different shifts. This page compares specific reference values and shows the projected residual so you can choose a starting point, then test the actual source and material.
Does the same Kelvin value guarantee two lights will match?
No. CCT compresses a complex spectrum into one value. Green-magenta tint, spectral gaps or peaks, color rendering, fixture age, dimming, and camera spectral response can still make nominally equal-CCT lights look different.
Is camera white balance the same as correcting a light with gel?
No. White balance changes the camera's interpretation of the complete scene. Gel changes the spectrum of one physical source before it reaches the subject. White balance cannot independently align two differently colored sources in the same shot.
Does this tool upload my lighting values?
This requires verification against the maintained runtime and page integrations. The supplied article does not establish whether source or target inputs are transmitted or tracked. Editorial follow-up: confirm conversion, matching, clipboard, CSV, network, and analytics behavior before making privacy assurances, and limit the wording to what that review confirms.