Starlight Tools

Annulus Calculator — Ring Area, Circumference and Radii

Enter any two independent ring measurements to calculate the rest. Your inputs stay in your browser.

Enter Two Known Values

Enter lengths in the selected unit and areas in its square unit, such as cm and cm². Changing the unit selector relabels values without converting them; convert your measurements to the appropriate units before entering them. Equivalent pairs such as outer radius plus outer circumference do not provide two independent measurements.

Annulus Results

Annulus diagram A scaled ring showing its outer radius, inner radius, and radial width. R = 10 cm r = 5 cm w = 5 cm A = 235.619 cm²
Outer radius (R)—
Inner radius (r)—
Ring width (w)—
Ring area (A)—
Outer diameter—
Inner diameter—
Outer circumference—
Inner circumference—
Total boundary length—

Enter two independent measurements, then calculate to see the formula path.

Annulus Formulas

An annulus is the region between two concentric circles. Let R be the outer radius, r the inner radius, and w = R − r the radial width.

Ring area

A = π(R² − r²)

The equivalent factored form A = π(R − r)(R + r) = πw(R + r) is especially useful for thin rings.

Outer and inner circumference

Cₒ = 2πR

Cᵢ = 2πr

Total boundary length

B = Cₒ + Cᵢ = 2π(R + r)

This counts both circular edges of the ring.

Radii from width and area

R + r = A/(πw)

Then R = ½(A/(πw) + w) and r = ½(A/(πw) − w). These relationships require w > 0 and A ≥ πw² for geometrically valid measurements. When A = πw², r = 0 and R = w, giving the supported solid-disk limit. When A < πw², the formula gives a negative inner radius, which is geometrically invalid.

Assumption: The two circles share the same centre and use one common length unit. The calculator requires R > r ≥ 0. An inner radius of zero is shown as the limiting solid-disk case.

How to Use the Annulus Calculator

  1. Select two independent measurements, such as outer and inner radius, width and area, or outer radius and area. Outer radius plus outer circumference describes only the outer circle; inner radius plus inner circumference describes only the inner circle. Neither pair determines the ring. Independent measurements must also be geometrically consistent: the resulting radii must satisfy R > r ≥ 0.
  2. Enter the values and choose their shared length unit. Ring area uses the corresponding square unit automatically.
  3. Select Calculate annulus to obtain radii, width, area, diameters, and all boundary lengths.
  4. Copy the formatted summary or download unrounded values as a CSV file if needed.

Changing the unit selector changes the unit label; it does not convert values already entered. Convert both known measurements first if they originally use different units.

Worked Annulus Examples

Outer radius 10 cm, inner radius 5 cm

A = π(10² − 5²) = 75π ≈ 235.619 cm².

Cₒ = 20π ≈ 62.832 cm and Cᵢ = 10π ≈ 31.416 cm. The width is 10 − 5 = 5 cm, the outer diameter is 20 cm, and the inner diameter is 10 cm. The total boundary length is 30π ≈ 94.248 cm. Displayed decimal examples are rounded to three decimal places.

Width 3 m, area 51π m²

R + r = 51π/(3π) = 17 m.

With R − r = 3, the radii are R = 10 m and r = 7 m.

Outer radius 8 ft, area 39π ft²

r = √(R² − A/π) = √(64 − 39) = 5 ft.

The ring width is 8 − 5 = 3 ft.

Common Annulus Calculation Mistakes

Subtracting radii instead of squared radii

Area is π(R² − r²), not π(R − r). The difference R − r is only the ring width. If you measure outer diameter Dₒ and inner diameter Dᵢ, halve each before entering radius values: R = Dₒ/2 and r = Dᵢ/2. The radial ring width is (Dₒ − Dᵢ)/2, not the full diameter difference.

Using only one circumference

The outer and inner edges have different circumferences. Use their sum when a problem asks for the entire boundary length.

Mixing units

Convert every length to one unit before calculating. Area conversion factors are squared: 1 m² = 10,000 cm².

Annulus Calculator FAQs

What is an annulus?

An annulus is the ring-shaped region between two concentric circles. Its outer radius must be greater than its inner radius.

How do you calculate the area of an annulus?

Subtract the inner circle area from the outer circle area: A = π(R² − r²).

What circumference does an annulus have?

An annulus has an outer circumference Cₒ = 2πR and an inner circumference Cᵢ = 2πr. Their sum is the total boundary length.

How do you find annulus area from width and radii?

Because R² − r² = (R − r)(R + r), use A = πw(R + r), where w = R − r.

Can ring width and area determine both radii?

Yes. First find R + r = A/(πw). Combine that with R − r = w to find each radius. Geometrically valid measurements require w > 0 and A ≥ πw². Equality gives r = 0, the supported solid-disk limit. If A < πw², the calculated inner radius is negative, so the measurements cannot form a valid ring or solid disk.

Can the inner radius be zero?

Yes. The calculator allows an inner radius of zero as the limiting case, which produces a solid disk rather than a ring with a hole.

Are my annulus measurements uploaded?

No. The calculation runs locally in your browser and does not send your measurements to a server.

Calculation Notes

Last reviewed: July 30, 2026 by the Starlight Tools editorial team.

The calculator uses standard Euclidean circle relationships and JavaScript's floating-point approximation of π. Browser floating-point results are approximations, and additional exported digits do not increase the accuracy of the original measurements. It evaluates area as πw(R + r) after solving, which reduces numerical cancellation by avoiding subtraction of two nearly equal squared radii. This factored formula cannot recover distinctions already lost when inputs are represented as browser floating-point numbers. Values outside reliable browser-number ranges or rings too thin to distinguish at the supplied magnitude are rejected with an explanation.

Explore more tools