Starlight Tools

Circle Chord Calculator — Chord Length, Sagitta and Central Angle

Enter two different, compatible measurements from radius, chord length, sagitta, and central angle to calculate the rest. Arc length and segment area are outputs, not input choices. Your inputs stay in your browser.

Enter Two Known Values

Arc and segment

Chord and Segment Results

Circle chord and sagitta diagram A scaled circle segment showing the chord, sagitta, radius, and central angle. c = 12 cm s r = 10 cm θ = 73.7°
Radius—
Chord length—
Sagitta—
Central angle—
Arc length—
Segment area—

Enter two different positive measurements, then calculate to see the formula path.

Circle Chord and Sagitta Formulas

A chord joins two points on a circle. The sagitta is the perpendicular distance from the chord to the midpoint of its arc. These formulas use central angle θ. For chord and sagitta, trigonometric expressions can use degrees when your calculator is in degree mode, or radians in radian mode. Inverse trigonometric functions likewise return angles in the selected mode. The formulas L = rθ and A = ½r²(θ − sin θ) require θ in radians, including the sine argument: θ_rad = θ_deg × π/180.

Chord from radius and angle

c = 2r sin(θ/2)

The same chord borders both a minor and major segment.

Sagitta from radius and angle

s = r(1 − cos(θ/2))

For a minor segment, an equivalent form is s = r − √(r² − c²/4).

Radius from chord and sagitta

r = c²/(8s) + s/2

This works for minor and major sagittas.

Angle, arc, and segment area

θ = 2 acos(1 − s/r) and L = rθ.

A = ½r²(θ − sin θ).

Assumption: The tool models a straight chord in a Euclidean circle and a non-degenerate arc with 0° < θ < 360°. “Sagitta” means the perpendicular height from the chord midpoint to the selected arc: 0 < s ≤ r for a minor segment and r ≤ s < 2r for a major segment.

How to Use the Circle Chord Calculator

  1. Choose minor for the shorter arc or major for the longer arc. A semicircle belongs to either selection.
  2. Select two different, compatible measurements from radius, chord length, sagitta, and central angle. Arc length and segment area are outputs.
  3. Enter positive values and choose the shared length unit. Choose degrees or radians if one input is an angle. Geometrically, radius r and chord c require 0 < c ≤ 2r; radius r and sagitta s require 0 < s < 2r. Central angles must satisfy 0° < θ < 360° (0 < θ < 2π radians) and match the selected segment: below 180° for a minor segment, above 180° for a major segment, and exactly 180° for a semicircle. With radius and sagitta, s < r identifies a minor segment, s = r a semicircle, and s > r a major segment. With chord and sagitta, s < c/2 identifies a minor segment, s = c/2 a semicircle, and s > c/2 a major segment. These are mathematical constraints.
  4. Select Calculate chord. The result card shows the solved geometry, formula path, and whether the segment is minor, major, or a semicircle.

All length inputs must use the same selected unit. Segment area automatically uses the square of that unit.

Worked Circle Chord Examples

Radius 10 cm and chord 12 cm

θ = 2 asin(12/20) ≈ 73.740°.

s = 10 − √(10² − 6²) = 2 cm.

The corresponding major segment has θ ≈ 286.260° and s = 18 cm.

Chord 16 m and sagitta 4 m

r = 16²/(8 × 4) + 4/2 = 10 m.

θ = 2 acos(1 − 4/10) ≈ 106.260°.

Radius 10 ft and major angle 240°

c = 2(10)sin(120°) ≈ 17.321 ft.

s = 10(1 − cos 120°) = 15 ft.

L = 10(4π/3) ≈ 41.888 ft. Here θ = 240° × π/180 = 4π/3 radians, so A = 50(4π/3 + √3/2) ≈ 252.741 ft². This is the area bounded by the chord and the selected major arc. It exceeds the semicircle area of 50π ≈ 157.080 ft².

Common Chord Calculation Mistakes

Using the wrong arc

One chord has a shorter and a longer arc. Radius and chord alone do not choose between them, so select minor or major before calculating.

Mixing angle units and calculator modes

For chord and sagitta, use degrees in degree mode or radians in radian mode; the 240° example evaluates sin(120°) and cos(120°) in degree mode. For L = rθ and A = ½r²(θ − sin θ), θ must be in radians, including the sine argument. Convert with θ_rad = θ_deg × π/180. The calculator converts degree inputs automatically.

Confusing sagitta and apothem

Sagitta runs from the chord to the arc. The center-to-chord distance for a minor segment is r − s.

Circle Chord Calculator FAQs

How do I calculate chord length from radius and angle?

Use c = 2r sin(θ/2), where θ is the central angle. Use degrees when your calculator is in degree mode, or radians in radian mode. To convert degrees to radians, use θ_rad = θ_deg × π/180. The arc-length formula L = rθ requires θ in radians.

How do I find sagitta from chord length and radius?

For the minor segment, use s = r − √(r² − c²/4). The calculator uses an equivalent numerically stable form.

Can chord length and sagitta determine the radius?

Yes. Use r = c²/(8s) + s/2. The chord and sagitta must both be positive.

What is the difference between a minor and major segment?

A minor segment has a central angle no greater than 180° and a sagitta no greater than the radius. A major segment uses the longer arc, with an angle at least 180° and sagitta at least equal to the radius.

What happens when the chord is a diameter?

The central angle is 180°, the chord length is twice the radius, and the sagitta equals the radius. The minor and major segments are both semicircles.

How is circular segment area calculated?

With θ in radians, segment area is A = ½r²(θ − sin θ). This formula works for both minor and major segments. Both θ and the sine argument must use radians; convert degree values with θ_rad = θ_deg × π/180.

Are my chord measurements uploaded?

No. The calculation runs locally in your browser and does not send your measurements to a server.

Calculation Notes

Last reviewed: July 30, 2026 by the Starlight Tools editorial team.

Calculations retain unrounded JavaScript floating-point values until display. Decimal places affect the page and copied summary; the downloaded CSV retains the underlying numeric results. Values that overflow or collapse beyond reliable browser precision are rejected. Editorial follow-up recommended: obtain an authoritative reference for the geometric formulas and separately verify the existing claims about numerical stability, CSV precision, measurement privacy, and rejection of unreliable results against the maintained implementation. Register verified references in sources before citing them, and retain the stated review date until an actual review occurs. Synchronize description metadata with the supported-input wording and FAQ metadata with the corrected angle-unit guidance through the existing managed workflow.

Explore more tools